Cut the hole in the nosecone today. It takes a while cutting it out with the dremel but the result is good. A little tidying will be needed before bonding in a grill.
Made the brackets for the front calliper brake pipes. I was just going to run the flexi hose straight into the calliper but it gets in the way of the cycle wing bracket.
Drilled out the front calliper mounting bolts so that they can be lock wired.
Opened up the pilot holes in the seat back so that I can access the inboard rear suspension bolts.
Fully bolted in the engine. All the mounts line up perfectly and needed no adjustment at all.
Took the propshaft over to P&J for shortening by 3"