Final job of the day and we're back in the shed for a solder-fest. All the dash wires have been cut to the same (ish) length and pins soldered on for the 15 way connector.

And here it is, fully populated. I think this job is going to be a "little"more difficult in the container when soldering on the matching plug  to the loom.
You may have noticed that there are a couple of pairs of wires that are the same colour! Ordinarily this would be a problem but I have already noted the use of each wire against the connector pin and wire colour. In other words, only a complete idiot could do it wrong now... :-)