Collected the kit from ST. Managed to fit everything in the back of a hired LDV van. Getting it all home involves all the bodywork being stored in the living room.
Started work on the suspension arms. Pressing the polybushes in is made slightly easier by chamfering the inside edge. However there are two problems.
One problem is that the metal part of the assembled bush is recessed so it cannot be correctly clamped in between the chassis suspension mounts.
Second problem is that the metal part of the bush is very very tight in the plastic part. Unfortunately it needs to rotate to let the suspension work, so that needs sorting as well.
Will phone Ian for advice but I'm thinking that it could be solved be reaming the inside of the bush out enough to let the bush rotate.