All the discs have now been cleaned up. Cut down the pushrods for the brake master cylinders. Made up bolts for the diff mount.
Fitted the rear discs and fitted both rear wheels. Tried out one of the rear wings and it looks as though they will fit over the wheels.
Reassembled the pedal box with all new nuts and bolts. However, have now discovered that the clutch pedal needs to be fitted before the pedal box is mounted in the car :-((
Attached the diff mounts to the diff and managed to get it fitted into the chassis with the aid of a trolley jack. The rear mount holes in the chassis need drilling out, but final diff position will need to be decided after the engine and propshaft have been fitted. I would have reassembled the front uprights but I've left the bearings at work.
Gathering together the components of the loom. Need to work out how to fit it all in the car without it being too difficult to alter. No doubt I will want to add something else very soon and it'd be nice to keep the wiring neat.