Time to get working on the pedal box. It needs a little fettling to get the new cable aligned correctly. Access to the pedal box at the moment is nigh on impossible - everything has to be done at arms length.
So, I decided to remove the firewall and scuttle. I did intend to take lots of photos to document this but the camera decided to play up and this is the only picture that came out!
The car is in a considerably more stripped down state than this at the moment and the next build diary entry should show how far I had to go to get decent access to work on the pedal box. I am now thinking of refitting the whole thing using rivnuts rather than rivetting it all back on again.