Made out a cardboard dash to fit the scuttle. This will be the template from which I'll cut the aluminium version, then the carbon fibre.
I used hole cutters to tidy up the mess of the hole where the bolt head comes through on the rear seat panel. It will not be visible anyway as the seats will be in the way but it's good to get it looking a bit more professional.
Finished riveting the rear seat panel. Didn't add that many more in the end. I'll see how it lives up to use. I've removed my nice shiny calliper brackets so that I can modify them. A subtle modification will mean they will allow the cycle wing brackets to fit.
Ran most of the engine loom today. Everything seems to go reasonably where it was before. I'm moving a few things around although I don't want to strip the loom apart if it's not completely necessary. Cut the hole in the bulkhead for the loom to pass through using the hole cutters.